Updating bios ga ma69vm s2 updating windows server 2016

Okay updates since my last post: Installed XP 64-bit onto a 20GB partition Installed Ubuntu 9.04 64-bit onto the rest I wanted to wait to see if anyone had replied to this post before messing around with the system. (--) NV(0): DDC detected a DFP: (II) NV(0): Manufacturer: GSM Model: 567e Serial#: 64804 (II) NV(0): Year: 2008 Week: 2 (II) NV(0): EDID Version: 1.3 (II) NV(0): Digital Display Input (II) NV(0): Max Image Size [cm]: horiz.: 49 vert.: 32 (II) NV(0): Gamma: 2.20 (II) NV(0): DPMS capabilities: Stand By Suspend Off (II) NV(0): Supported color encodings: RGB 4:4:4 YCr Cb 4:4:4 (II) NV(0): First detailed timing is preferred mode (II) NV(0): red X: 0.635 red Y: 0.342 green X: 0.292 green Y: 0.611 (II) NV(0): blue X: 0.147 blue Y: 0.070 white X: 0.313 white Y: 0.329 (II) NV(0): Supported VESA Video Modes: (II) NV(0): [email protected] (II) NV(0): [email protected] (II) NV(0): [email protected] (II) NV(0): [email protected] (II) NV(0): [email protected] (II) NV(0): [email protected] (II) NV(0): [email protected] (II) NV(0): [email protected] (II) NV(0): [email protected] (II) NV(0): [email protected] (II) NV(0): [email protected] (II) NV(0): Manufacturer's mask: 0 (II) NV(0): Supported Future Video Modes: (II) NV(0): #0: hsize: 1440 vsize 900 refresh: 60 vid: 149 (II) NV(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) NV(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513 (II) NV(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) NV(0): Supported additional Video Mode: (II) NV(0): clock: 119.0 MHz Image Size: 474 x 296 mm (II) NV(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0 (II) NV(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0 (II) NV(0): Supported additional Video Mode: (II) NV(0): clock: 146.2 MHz Image Size: 474 x 296 mm (II) NV(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0 (II) NV(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0 (II) NV(0): Ranges: V min: 56 V max: 75 Hz, H min: 28 H max: 83 k Hz, Pix Clock max 150 MHz (II) NV(0): Monitor name: W2252 (II) NV(0): EDID (in hex): (II) NV(0): 00ffffffffffff001e6d7e5624fd0000 (II) NV(0): 02120103ea312078eaaec5a2574a9c25 (II) NV(0): 125054a76b80950081808140714f0101 (II) NV(0): 0101010101017c2e90a0601a1e403020 (II) NV(0): 3600da281100001a21399030621a2740 (II) NV(0): 68b03600da281100001c000000fd0038 (II) NV(0): 4b1c530f000a202020202020000000fc (II) NV(0): 0057323235320a202020202020200044 (--) NV(0): Trying load detection on VGA1 ... (II) NV(0): EDID vendor "GSM", prod id 22142 (II) NV(0): Using hsync ranges from config file (II) NV(0): Using vrefresh ranges from config file (II) NV(0): Printing DDC gathered Modelines: (II) NV(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 hsync -vsync (64.7 k Hz) (II) NV(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync vsync (65.3 k Hz) (II) NV(0): Modeline "800x600"x0.0 40.00 800 8 600 601 605 628 hsync vsync (37.9 k Hz) (II) NV(0): Modeline "800x600"x0.0 36.00 800 8 600 601 603 625 hsync vsync (35.2 k Hz) (II) NV(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 k Hz) (II) NV(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 k Hz) (II) NV(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync vsync (31.5 k Hz) (II) NV(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 hsync vsync (80.0 k Hz) (II) NV(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 hsync vsync (60.0 k Hz) (II) NV(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 k Hz) (II) NV(0): Modeline "832x624"x0.0 57.28 832 8 624 625 628 667 -hsync -vsync (49.7 k Hz) (II) NV(0): Modeline "800x600"x0.0 49.50 800 8 600 601 604 625 hsync vsync (46.9 k Hz) (II) NV(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 hsync vsync (67.5 k Hz) (II) NV(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 hsync -vsync (55.5 k Hz) (II) NV(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 hsync vsync (64.0 k Hz) (II) NV(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 9 hsync vsync (60.0 k Hz) (II) NV(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 hsync vsync (67.5 k Hz) (II) NV(0): EDID vendor "GSM", prod id 22142 (II) NV(0): Probing for EDID on I2C bus 1... none found (--) NV(0): Trying load detection on VGA2 ... Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Contents of /var/log/Xorg.0(This is the working Config) (II) NV(0): First detailed timing is preferred mode (II) NV(0): red X: 0.635 red Y: 0.342 green X: 0.292 green Y: 0.611 (II) NV(0): blue X: 0.147 blue Y: 0.070 white X: 0.313 white Y: 0.329 (II) NV(0): Supported VESA Video Modes: (II) NV(0): [email protected] (II) NV(0): [email protected] (II) NV(0): [email protected] (II) NV(0): [email protected] (II) NV(0): [email protected] (II) NV(0): [email protected] (II) NV(0): [email protected] (II) NV(0): [email protected] (II) NV(0): [email protected] (II) NV(0): [email protected] (II) NV(0): [email protected] (II) NV(0): Manufacturer's mask: 0 (II) NV(0): Supported Future Video Modes: (II) NV(0): #0: hsize: 1440 vsize 900 refresh: 60 vid: 149 (II) NV(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) NV(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513 (II) NV(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) NV(0): Supported additional Video Mode: (II) NV(0): clock: 119.0 MHz Image Size: 474 x 296 mm (II) NV(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0 (II) NV(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0 (II) NV(0): Supported additional Video Mode: (II) NV(0): clock: 146.2 MHz Image Size: 474 x 296 mm (II) NV(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0 (II) NV(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0 (II) NV(0): Ranges: V min: 56 V max: 75 Hz, H min: 28 H max: 83 k Hz, Pix Clock max 150 MHz (II) NV(0): Monitor name: W2252 (II) NV(0): EDID (in hex): (II) NV(0): 00ffffffffffff001e6d7e5624fd0000 (II) NV(0): 02120103ea312078eaaec5a2574a9c25 (II) NV(0): 125054a76b80950081808140714f0101 (II) NV(0): 0101010101017c2e90a0601a1e403020 (II) NV(0): 3600da281100001a21399030621a2740 (II) NV(0): 68b03600da281100001c000000fd0038 (II) NV(0): 4b1c530f000a202020202020000000fc (II) NV(0): 0057323235320a202020202020200044 (--) NV(0): Trying load detection on VGA1 ... (II) NV(0): EDID vendor "GSM", prod id 22142 (II) NV(0): Using hsync ranges from config file (II) NV(0): Using vrefresh ranges from config file (II) NV(0): Printing DDC gathered Modelines: (II) NV(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 hsync -vsync (64.7 k Hz) (II) NV(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync vsync (65.3 k Hz) (II) NV(0): Modeline "800x600"x0.0 40.00 800 8 600 601 605 628 hsync vsync (37.9 k Hz) (II) NV(0): Modeline "800x600"x0.0 36.00 800 8 600 601 603 625 hsync vsync (35.2 k Hz) (II) NV(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 k Hz) (II) NV(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 k Hz) (II) NV(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync vsync (31.5 k Hz) (II) NV(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 hsync vsync (80.0 k Hz) (II) NV(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 hsync vsync (60.0 k Hz) (II) NV(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 k Hz) (II) NV(0): Modeline "832x624"x0.0 57.28 832 8 624 625 628 667 -hsync -vsync (49.7 k Hz) (II) NV(0): Modeline "800x600"x0.0 49.50 800 8 600 601 604 625 hsync vsync (46.9 k Hz) (II) NV(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 hsync vsync (67.5 k Hz) (II) NV(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 hsync -vsync (55.5 k Hz) (II) NV(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 hsync vsync (64.0 k Hz) (II) NV(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 9 hsync vsync (60.0 k Hz) (II) NV(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 hsync vsync (67.5 k Hz) (II) NV(0): EDID vendor "GSM", prod id 22142 (II) NV(0): Probing for EDID on I2C bus 1... none found (--) NV(0): Trying load detection on VGA2 ... Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) Load Module: "nvidia" (II) Loading /usr/lib/xorg/modules/drivers//nvidia_(II) Module nvidia: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.

t=1168184&highlight=geforce 9500GT This post was more of a question than a problem. If I can't figure this out I will have no other choice than to install Windows 64-bit edition which I really do not want to do. Me and a friend both built our pc's at the same time with identical parts, and he also is not having any problems. Is there a file that I can find on the system that is similar to in windows that I could use to see where the system is shutting down.Someone please assist me I am using the same video card and motherboard as you, and have no problems. Again this being a hardware failure is really not the issue.The only differences are the CPU, monitor and RAM, but those should not make a difference. I have enough knowhow to know the difference between a hardware failure and a software failure and this is pointing to a software failure.(II) NVIDIA(0): NVIDIA GPU Ge Force 9500 GT (G96) at PCI:1:0:0 (GPU-0) (--) NVIDIA(0): Memory: 1048576 k Bytes (--) NVIDIA(0): Video BIOS: .00.00 (II) NVIDIA(0): Detected PCI Express Link width: 16X (--) NVIDIA(0): Interlaced video modes are supported on this GPU (--) NVIDIA(0): Connected display device(s) on Ge Force 9500 GT at PCI:1:0:0: (--) NVIDIA(0): LG W2252 (DFP-0) (--) NVIDIA(0): LG W2252 (DFP-0): 330.0 MHz maximum pixel clock (--) NVIDIA(0): LG W2252 (DFP-0): Internal Dual Link TMDS (II) NVIDIA(0): Assigned Display Device: DFP-0 (==) NVIDIA(0): (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select" (==) NVIDIA(0): will be used as the requested mode.(==) NVIDIA(0): (II) NVIDIA(0): Validated modes: (II) NVIDIA(0): "nvidia-auto-select" (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050 (--) NVIDIA(0): DPI set to (87, 83); computed from "Use Edid Dpi" X config (--) NVIDIA(0): option (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.

Search for updating bios ga ma69vm s2:

updating bios ga ma69vm s2-49

Update: I decided to test and see if the issue is the card. Org X Server 1.6.0 Release Date: 2009-2-25 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-15-server x86_64 Ubuntu Current Operating System: Linux VBOXSVR 2.6.28-13-generic #45-Ubuntu SMP Tue Jun 30 UTC 2009 x86_64 Build Date: 09 April 2009 AM xorg-server 2:1.6.0-0ubuntu14 ([email protected]) Before reporting problems, check make sure that you have the latest version. (II) "dri2" will be loaded even though the default is to disable it.

Leave a Reply

Your email address will not be published. Required fields are marked *

One thought on “updating bios ga ma69vm s2”